Pratt Floats Student Work on a Mylar Cloud

Brought to you with support from:
Fabrikator
A cloud-like Mylar net supports architectural models in Pratt's annual graduate school exhibition. (Courtesy Michael Szivos)

A cloud-like Mylar net floats architectural models in Pratt’s annual graduate school exhibition. (Courtesy Michael Szivos)

Installation inverts conventional relationship between architectural models and images.

Each year, a group of Pratt Institute graduate students is challenged with pushing the boundaries of exhibition design as they curate the student work from the previous year. “The basic brief is for it not to be a show where it’s work on white walls, but that there’s an installation component,” said Softlab‘s Michael Szivos, who co-taught the 2014 exhibition course with Nitzan Bartov. The spring show coincides with the publication of Process, a catalog of student projects. “The book shows it in that more normative condition, year by year,” said Szivos. “The installation works in tandem with that. The hope is that the students come up with something different.” This year Szivos’ students passed the test with flying colors, constructing a floating display out of Mylar, medium-density fiberboard, cardboard, and Tyvek that upends the conventional relationship between architectural models and two-dimensional images.

Read More

PART Studio Plays Peek-a-boo with Plywood

Brought to you with support from:
Fabrikator
PART Studio designed the plywood Peek-a-boo Curtain to behave like fabric. (Courtesy PART Studio)

PART Studio designed the plywood Peek-a-boo Curtain to behave like fabric. (Courtesy PART Studio)

Louisville installation elicits fabric-like behavior from wood.

PART Studio designed and built their plywood Peek-a-boo Curtain in just four days, after a last-minute invitation from Louisville arts and business networking organization I.D.E.A.S. 40203. “We went to a meeting, talked about it, then drove to the plywood store,” recalled principal Nathan Smith. Luckily, the architects were not starting from scratch. Rather, Smith and partner Mark Foxworth seized the opportunity to build a full-scale mock-up of an idea they had been tossing around for some time: a curtain that, though built of wood, would behave like fabric. Staged at FirstBuild, a design and fabrication studio run through a partnership between GE Appliances and Local Motors, the exhibition also gave the designers a chance to explore the space between art and commerce. “With our piece we were looking not only to span the specific interests of the groups involved, but also to consider the relationships between product design, art, and architectural design,” said Smith. Read More

Martha Schwartz’ Hillside Mountain Range

Brought to you with support from:
Fabrikator
Fengming Mountain Park features a series of metal pavilions imagined as abstracted mountains. (Terrence Zhang)

Fengming Mountain Park features a series of metal pavilions imagined as abstracted mountains. (Terrence Zhang)

Illuminated steel pavilions mimic Chinese peaks.

The hillside site of Fengming Mountain Park, in Chongqing, China, presented Martha Schwartz Partners with both a practical challenge and a source of inspiration. Asked by Chinese developer Vanke to design a park adjacent to the sales office for a new housing development, the landscape architecture and urban planning firm quickly gravitated toward the metaphor of a mountain journey. “That’s why in the plans you see a zig zag pattern” to the path leading down to the sales center from the car park, said associate Ignacio López Busón. Steel pavilions scattered along the walkway pick up on the theme, taking the form of abstracted mountain peaks. “That’s something the client really liked,” said López Busón. “Once the idea was clear, it was all about developing the shape of them, and trying to make them look special.”
Read More

Prefabricated Glamping Tents by ArchiWorkshop

Brought to you with support from:
Fabrikator
ArchiWorkshop's semi-permanent glamping structures reimagine the conventional platform tent. (Courtesy ArchiWorkshop)

ArchiWorkshop’s semi-permanent glamping structures re-imagine the conventional platform tent. (Courtesy ArchiWorkshop)

Dynamic steel and PVDF structures shelter campers in style.

In South Korea, glamping—or “glamorous camping”—is all the rage. The practice combines conventional camping’s affinity for the outdoors with hotel amenities, including comfortable bedding and fine food. Seoul firm ArchiWorkshop’s prefabricated, semi-permanent glamping structures are a design-minded twist on the traditional platform tent. “We [set out to] create a glamping [tent] that gives people a chance to experience nature very close, while also providing a uniquely designed architectural experience,” said partner Hee Jun Sim. “There are many glamping sites in Korea, but they’re actually not so high-end. We were able to bring up the level of glamping in Korea.” Read More

Giant Pixel’s Binary Star Wars Canopy

Fabrikator, Interiors, West
Friday, February 7, 2014
.
Brought to you with support from:
Fabrikator
The steel canopy introduces a Star Wars theme with a binary translation of the trilogy's opening text. (Jasper Sanidad)

The steel canopy introduces a Star Wars theme with a binary translation of the trilogy’s opening text. (Jasper Sanidad)

A software developer gets a subtly intergalactic theme for its new San Francisco headquarters.

For the Giant Pixel corporation’s new headquarters, Studio O+A evoked the feel of a sophisticated galaxy far, far away in a renovated San Francisco workspace. With the help of Chris French Metal, Nor-Cal Metal Fabricators, and Seaport Stainless, O+A designers Denise Cherry and Primo Orpilla designed an interior environment that invokes themes from the client’s favorite movie, Star Wars, without delivering a set design for the Spaceballs parody. One of the office’s most notable features is an entry canopy constructed from ¼-inch hot rolled steel plate with laser-cut perforations that sets the office theme with a binary translation of the trilogy’s opening crawling text. Read More

At SCI-Arc, the Magic is Inside the Box; Eric Owen Moss Explains Why

SCI-ARC IS PLANNING A NEW DIGITAL FABRICATION LAB KNOWN AS THE "MAGIC BOX" (SCI-ARC)

SCI-ARC IS PLANNING A NEW DIGITAL FABRICATION LAB KNOWN AS THE “MAGIC BOX” (SCI-ARC)

“Actually, the box isn’t magic, so don’t be disappointed you didn’t get ahold of Merlin the Magician,” Eric Owen Moss said at the start of a recent interview. Moss, director of the Southern California Institute of Architecture (SCI-Arc), was referring to the school’s new digital fabrication lab.

Dubbed the Magic Box, the two-story, prefabricated steel structure will be constructed at the south end of the SCI-Arc building. But Moss didn’t want to focus on the laboratory itself, which was designed by several architects affiliated with SCI-Arc (including Moss’s own firm). Instead, he said, “the game is, what’s inside is magic. It’s not so much the object, but what the object contains.”

Continue reading after the jump.

Thomas Balsley Reaches Destination with Landscape Forms

Fabrikator
Friday, December 13, 2013
.
Brought to you with support from:
Fabrikator
Brought to you with support from:
Fabrikator

The Transit Bench was fabricated in Landscape Forms custom project division, Studio 431. (Michael Koontz/Thomas Balsley Associates)

The Transit Bench was fabricated in Landscape Forms custom project division, Studio 431. (Michael Koontz/Thomas Balsley Associates)

Aerodynamics of transit inform the design for new public seating in busy pedestrian areas like train platforms.

Landscape architect Thomas Balsley has been shaping public spaces in urban settings for more than 35 years, from the Bronx to Dallas to Portland. Even at large scales his work underscores attention to detail, all the way down to the furniture that adorns his sites. As a resident of New York since the 1970s, Balsley is all too aware of the way public benches and seating function in densely populated cities. For Transit Bench—fabricated by Landscape Forms custom project team at Studio 431—he designed a seating option for busy pedestrian areas, like train platforms and street-side parklets, where movement engulfs stationary seating.

“I started thinking of the aerodynamic aspects of transit and airline design, where the skin of the plane is an important structural component,” Balsley told AN. “I had the idea that this folded piece of skin could be the structure.” The bench, which rests on two sled base legs, is one solid form, made from a single sheet of stainless steel with laser cut perforations that suggest motion.

Read More

Architect Elena Manferdini Completes the Colorful, Laser-Cut “Nembi” Installation in South Los Angeles

Architecture, West
Thursday, December 12, 2013
.
(Atelier Manferdini)

(Atelier Manferdini)

Until recently, talented Los Angeles–based architect Elena Manferdini had practiced all over the world, but barely  in her own city. That has definitely changed. Earlier this year she worked on two shops in Venice, and her latest project is an art installation at the entry way of the Hubert H. Humphrey Comprehensive Health Center in South Los Angeles. The colorful project is part of the LA County Art Commission’s Civic Art project, a one percent program for county facilities.

Read more after the jump.

Kammetal Tops Off SOM’s 1 World Trade Center

Fabrikator
Friday, November 15, 2013
.
Brought to you with support from:
Fabrikator
Kammetal fabricated 48 triangular panels for the beacon of 1 World Trade Center in Manahattan. (courtesy DCM Erectors)

Kammetal fabricated 48 triangular panels for the beacon of 1 World Trade Center. (courtesy DCM Erectors)

Seven tons of glass and steel clad a structural stainless frame on the Western Hemisphere’s tallest building.

Brooklyn-based metal fabrication company Kammetal and DCM Erectors of New Jersey were selected to fabricate and install the crowning beacon atop the spire on 1 World Trade Center. The fabrication team executed SOM’s design for a dynamic and complex adornment to one of the country’s most anticipated buildings, along with the help of engineers at Buro Happold to ensure safety at 1,776 feet.

To craft a 15-ton, 50-foot beacon that accounted for thermal expansion and movement, Kammetal modeled and drew their designs in SolidWorks. The company’s team laser cut 48 triangular 316 stainless steel panels with ¼-inch thickness in a nondirectional finish to clad DCM’s square tubular steel frame. “Before we started the project, we had the structural frame 3D scanned to generate a point cloud,” explained Sam Kusack, president at Kammetal. “Because the structure was so dynamic—it contains zero right angles or reference points—we had to verify the conditions.” Read More

Halloween Masterpiece: Dan Funderburgh’s Laser-carved Jack-o-lantern

East
Thursday, October 31, 2013
.
Dan Funderburgh's Laser-carved jack-o-lantern, courtesy of DesignSponge

Dan Funderburgh’s Laser-carved jack-o-lantern. (Courtesy DesignSponge)

Happy Halloween! With Jack-O-Lantern’s popping up on stoops across the country, it was only a matter of time before some creative type ran one through a laser cutter. Brooklyn-based design bloggers at DesignSponge have launched a contest for the most creative pumpkin carvings and artist Dan Funderburgh rose to the challenge and delivered an incredible deconstructed pumpkin, carved from lasers instead of by hand. After playing with a few different design motifs, Funderburgh decided to go with an intricate pattern inspired by Mexican punched tin lanterns.

Continue reading after the jump.

Blurred Lines: SOFTlab and Cosentino

Fabrikator
Friday, October 11, 2013
.
Brought to you with support from:
Fabrikator
SOFTlab's ATRIUn model is on view through the month of October, as part of an ongoing exhibition featuring designs with Dekton. (Creative Whirlwind)

SOFTlab’s ATRIUn model is on view through the month of October, as part of an ongoing exhibition featuring designs with Dekton. (Creative Whirlwind)

A new exhibition helps a New York-based firm explore indoor and outdoor applications of a new building material.

Cosentino is celebrating Architecture Month with Surface Innovation, a multi-media exhibition at the Center for Architecture in New York that presents innovative applications of its new Dekton material. A combination of raw, inorganic materials found in glass, porcelain, and natural quartz, the new indoor/outdoor surfacing material is made with particle sintering technology (PST) that recreates the natural process of stone formation. The company invited six local architecture firms to design unique projects featuring the material, including SOFTlab, a design/build firm known for its mix of research, craft, and technology in large-scale installations and building projects.

For SOFTlab, working with a product that could be used for both interiors and exterior applications was an opportunity to reconcile the growing inverse relationship between the skin and volume of large buildings. “We came up with the idea of building something a little more dense than a single story or residentially scaled building, where Dekton may be used,” said Michael Svivos, founder and director of SOFTlab. “We went to a larger scale building, that blurs the inside and outside.” Read More

Snøhetta and Architexas Make Leaves of Steel

Fabrikator, Southwest
Friday, September 27, 2013
.
Brought to you with support from:
Fabrikator
Brought to you with support from:
Fabrikator

 
The pavilion's design is inspired by the surrounding tree canopy. (Courtesy Architexas)

The pavilion’s design is inspired by the surrounding tree canopy. (Courtesy Architexas)

A Dallas pavilion’s exposed structure demanded extremely tight tolerances of Irving, Texas–based fabricator, CT&S.

Ten years ago, the Dallas Parks & Recreation Department launched a revitalization project to update 39 decrepit pavilions throughout its park system. One of them—which was to be designed by the New York office of Norwegian architecture firm Snøhetta in partnership with local practice Architexas—sat at the mouth of a meadow lined by old pecan and oak trees on the southern side of College Park. Speaking about the site, Snøhetta director Elaine Molinar said, “You’re aware you’ve left the surrounding neighborhood and entered a more rural setting.” This is the feeling that the team wished to encourage in its design for a new pavilion.

Continue reading after the jump.

Page 1 of 212

Advertise on The Architect's Newspaper.

Submit your competitions for online listing.

Submit your events to AN's online calendar.




Archives

Categories

Copyright © 2014 | The Architect's Newspaper, LLC | AN Blog Admin Log in. The Architect's Newspaper LLC, 21 Murray Street 5th Floor | New York, New York 10007 | tel. 212.966.0630
Creative Commons License