Product> The Comprehensive New York Design Week 2013 Roundup

East, Newsletter, Product
Monday, June 10, 2013
.
The Low Collection by 13&9 Design

The Low Collection by 13&9 Design.

New York’s inaugural design week, held from May 10 through 21, was a comprehensive, two-week celebration of all things design across Manhattan island, as well as parts of Brooklyn. Showcasing the latest from industry stalwarts to emerging and independent designers—local, domestic, and international—AN culled its top picks of New York Design Week products from the ICFF show floor, Wanted Design exhibitions, showroom launches, and all events in between. 

The Low Collection
13&9 Design
The multidisciplinary Austrian design studio debuted at Wanted Design with a collection of furniture, wearable fashion and accessories, a cinematic video, and a music album. With the Low Collection (pictured above), Corian is formed into several seating styles that combine with storage vessels, all at ground level. Suitable for outdoors, furniture heights can be modified to generate a unique landscape.

Continue reading after the jump.

A Plus Design for Elevator B Hive

Fabrikator
Friday, June 7, 2013
.
Brought to you with support from:
Fabrikator
Fabrikator
Elevator B by students of the School of Architecture and Planning at the University of Buffalo, located in Buffalo's First Ward (Hive City Design Team)

Elevator B by students of the School of Architecture and Planning at the University of Buffalo, located in Buffalo’s First Ward (Hive City Design Team)

The 22-foot Elevator B honeybee habitat was the winning proposal in a design competition sponsored by Rigidized Metals and the University
at Buffalo.

The disquieting phenomenon of colony collapse disorder is seeing global bee populations vanish before our eyes, threatening the pollination of much of the world’s food crops. So when Buffalo, New York, metal fabricator Rigidized Metals discovered a colony of bees in an abandoned grain silo that its owner purchased, the company sponsored the Hive City competition. Students at the University at Buffalo (UB) were invited to design a viable bee habitat that would spark interest in the Silo City area and demonstrate the strengths of various building materials suppliers in Buffalo’s First Ward. As the first, permanent new construction on the Silo City site, Rigidized Metals wanted something that would be visible from nearby Ohio Street, stand out in the industrial landscape, and be reverent to neighboring silos.

The winning design, known as Elevator B, is a 22-foot tower of 18-gauge sheet metal panels, with strategic perforations for natural ventilation, light, and heat management. An operable bee “cab” in the interior supports the actual hive on a pulley system, allowing beekeepers to access the colony and return it to a level that keeps the population safe from predators. Read More

DesignX Workshop: MODE LAB INTRO TO PARAMETRIC DESIGN WITH GRASSHOPPER

East
Wednesday, May 15, 2013
.

designx_rhino_02

Interested in learning how to build parametric design models using Grasshopper for Rhino3D? DesignX, in conjunction with the International Contemporary Furniture Fair, is offering a workshop on Monday, May 20, 2013 from 10:30 AM to 12:30 PM that focuses on fundamental concepts and mechanisms with an emphasis on professional practice. Instructors Ronnie Parsons and Gil Akos will help participants understand pertinent applications of parametric design and will demonstrate how to use Grasshopper in creative practices. Interiors, architects, and anyone seeking to find out what parametric design is and when it is useful can register and attend. The workshop fulfills two AIA CEUs.

Learn Parametric Design From the Pros at Facades+PERFORMANCE On April 11+12

East
Tuesday, April 2, 2013
.

parametric_wkshp_01

We know you’ve seen those sleek parametric designs that are all the rage in cutting-edge architecture, but have you ever wanted to make your own? Venturing into the software zoo of Grasshopper and Rhino can be daunting on your own, and understanding algorithms and computational geometry can sound like Greek to the uninitiated. Luckily, parametric expert Ronnie Parsons of Mode Collective has joined the upcoming facades+PERFORMANCE Conference taking place in New York City next week, April 11 and 12, and will help guide beginners into the exciting world of Parametric Design.

With a focus on fundamental concepts and workflows for creating performance-based design models with the parametric design tool  Grasshopper for Rhino3D. Parsons’ Technical Workshop, Introduction to Parametric Design, will guide participants through a series of exercises designed to emphasize the relevant applications of parametric design for professional practice.

Register today for the Introduction to Parametric Design workshop and the facades+PERFORMANCE before space fills up. There are 8 LU AIA CE credits up for grabs, so head on over to the facades+PERFORMANCE homepage for more information.

Mode Lab Launches Online Learning Resource for Parametric and Digital Design

International
Tuesday, February 26, 2013
.
(Courtesy Mode Lab)

(Courtesy Mode Lab)

Intrigued by parametric architecture but don’t know where to begin? Meet Mode Lab, an online network connecting creatives to everything architectural and design related including courses, talks, and workshops that help teach how to use advanced systems like Data Trees, Grasshopper, and Kangaroo. Other courses offer lessons in Organic Modeling to Parametric Pleating to Algorithmic Design. The group just launched their new website, with several upgrades that make taking courses even easier. Courses are now easily sortable by format, subject, or software; a growing community of instructors have joined the Mode Lab team; payment has been streamlines; and work by Mode Lab members is now featured on the site. Mode Lab’s growing online destination is transforming the way designers and architects interact, share, and gain the skills and knowledge to develop innovative ideas.

Poon Design Uses Parametric Algorithms to Create Geometric Trellis in Pasadena

West
Tuesday, November 13, 2012
.
(Courtesy Poon Design)

(Courtesy Poon Design)

Beverly Hills-based Poon Design has transformed a Pasadena home’s porch trellis into a modern mathematical marvel. Using a parametric algorithm, architects Anthony Poon and John Kim used translucent acrylic to create a perforated structure composed of water-jet-cut holes. Circles of varying sizes dot the trellis allowing light to softly filter in while still providing ample shade.

“The glowing pattern allows sunlight to stream in alongside constantly changing shadows,” said Poon. The wood frame of the 9-foot structure is supported by galvanized metal poles and covers a 550 square-foot deck made from wood and recycled plastic composite lumber planks. Hexagonal cut-outs pepper the deck reaching out towards the future pool, garden, and guest house. A tree will be planted in the largest opening and align with an aperture above for a truly contemporary look.

Another image after the jump.

Profile> Evolute workshop on Parametric Optimization with Florian Isvoranu, October 12

Midwest
Wednesday, September 26, 2012
.
Evolute-designed "KREOD" pavilion in London. Photo: Kin Ho

Evolute-designed “KREOD” pavilion in London. Photo: Kin Ho

The Austrian company Evolute itself began with an evolution: in 2008 a research group on industrial design and geometric modeling at Vienna University of Technology founded a business. The goal? Deploy mathematicians, engineers, and architects to create tools that facilitate the design and optimization of highly complex geometric forms.

In the October 12 workshop “Parametrically Driven Optimization for Freeform Facades” Florin Isvoranu, an architect who now leads Evolute’s outreach efforts, will focus on optimization of complex geometry envelopes for efficient and cost effective fabrication. Working in Rhino 4, EvoluteTools PRO 2.0, and Monkey Script Editor, Isvoranu will move step by step from design to optimization to detailing to generating fabrication information, and how to parametrically link these steps into an integrated workflow.  The day-long event is part of Collaboration: The Art and Science of Building Facades, the Chicago edition of The Architect’s Newspaper‘s popular conference taking place October 11-12.

Continue reading after the jump.

Zaha to Take Parametric Design a Step Further at SCI-Arc

Newsletter, West
Friday, September 14, 2012
.
Rendering of Zaha Hadid's Pleated Shell Structures installation at SCI-Arc. (Courtesy Zaha Hadid)

Rendering of Zaha Hadid’s Pleated Shell Structures installation at SCI-Arc. (Courtesy Zaha Hadid)

Prepare yourselves Angelenos: Zaha is coming to town. Her installation Pleated Shell Structures will be on display at the SCI-Arc gallery beginning October 12. The installation’s details are still limited, but it appears that it will further push Hadid’s and partner Patrik Schumacher’s legendary experimentation with parametric design, giving smooth forms a more tactile, imbedded surface. So if parametric design is 3D, could this be 4D? Which dimension are we in now, anyway?

Profile> Architect Chris Lasch Presents Tooling Scripted Facades on July 27

West
Monday, June 25, 2012
.
Chris Lasch (left) and Benjamin Arranda (right) of the New York-based firm Arranda Lasch. On July 27 Chris Lasch will lead a workshop on "Scripted Facades."

Chris Lasch (left) and Benjamin Arranda (right) of the New York-based firm Aranda/Lasch. On July 27 Chris Lasch will lead the workshop Scripted Facades.

“We’ve always been interested in the tools used in architecture and have always tried to be critical of these tools,” stated the partners of Aranda/Lasch after being named finalists in MoMA PS 1’s Young Architect Program (YAP) in 2005. “At a certain point we began making our own computational tools and realized that we could make structures that organize space and put forth a way to practice architecture.” Fast forward seven years, and Benjamin Aranda and Chris Lasch continue to pioneer new forms through innovative scripting.

On July 27, Chris Lasch will lead Scripted Facades, a special workshop that is part of AN‘s upcoming conference Collaboration: the Art and Science of Building Facades, taking place July 26-27 in San Francisco.

More about Lasch and his Scripted Facades workshop after the jump.

Play It Forward: A Temporary Interactive Installation

Fabrikator
Friday, January 13, 2012
.
Brought to you with support from:
Fabrikator
Fabrikator Brought to you by:

Part of this year’s Digital Capital Week, the project turns games into donations for a charitable cause.

When Washington, D.C.-area designers Hiroshi Jacobs, Jonathan Grinham, and Kash Bennett were asked to create an installation for Digital Capital Week’s 24-Hour City Project, which seeks to improve urban environments with creative technology, they knew it had to be more than just something to look at. The team created Play It Forward, an interactive, motion-sensing display that donates a small amount of money to charity each time someone plays with it. Unveiled at the technology festival’s closing party at Arena Stage and now part of an exhibit at D.C.’s Project 4 Gallery, the installation demonstrates how advanced parametric design and digital fabrication methods can work together to encourage interaction and promote social change in the process.

Continue reading after the jump.

Page 2 of 212

Advertise on The Architect's Newspaper.

Submit your competitions for online listing.

Submit your events to AN's online calendar.




Archives

Categories

Copyright © 2014 | The Architect's Newspaper, LLC | AN Blog Admin Log in. The Architect's Newspaper LLC, 21 Murray Street 5th Floor | New York, New York 10007 | tel. 212.966.0630
Creative Commons License