MAD Museum gets Out of Hand

Fabrikator
Friday, November 1, 2013
.
Brought to you with support from:
Fabrikator
The ICD/ITKE Research Pavilion by Achim Menges and Jan Knippers is part of MAD Museum's new exhibition. (Achim Menges)

The ICD/ITKE Research Pavilion by Achim Menges and Jan Knippers is part of MAD Museum’s new exhibition. (Achim Menges)

A cross-section of postdigital design work illustrates the role of parametrics in the built environment.

Spawned from his 2011 show on Patrick Jouin, Museum of Arts & Design (MAD) curator Ronald Labaco conceived Out of Hand as a more comprehensive show that clarified the role of digital design, from its capabilities to its significance in our daily lives. “People just didn’t get it,” said Labaco of Jouin’s 2011 MAD show. “Unless you’re immersed in it, it can be hard to understand so I thought if we showed something like this in the galleries again, we needed to provide information that can be digested more clearly.”

Staged across three floors of the museum, with two exterior sculptures, Labaco said the show is an important program for MAD among other New York art institutions like MoMA, Cooper Hewitt, and the New Museum. The goal to raise awareness of 3D printing is timely, by chance. “Paolo Antonelli’s Design and the Elastic Mind, and two shows from Material Connection were complements to my show for the uninitiated,” Labaco explained. Out of Hand’s broad scope includes digital designing and fabrication processes like CNC milling, digital weaving and knitting, laser cutting, and 3D printing to display how these technologies influence the built environment. “It’s a historical look at the last 8 years and works from as early as 2005 are incorporated because, in my mind, that was when the major shift between rapid prototyping and 3D printing really occurred,” said Labaco. Read More

PROJECTiONE’s Engrained Parametrics

Fabrikator
Friday, September 6, 2013
.
Brought to you with support from:
Fabrikator
Brought to you with support from:
Fabrikator

 
PROJECTiONE fabricated 280 fins from polystyrene for a 12-foot, free-standing architectural panel. (courtesy PROJECTiONE)

PROJECTiONE fabricated 280 fins from polystyrene for a 12-foot, free-standing architectural panel. (courtesy PROJECTiONE)

Designers in Indianapolis fabricate a graphic, splintered design.

Indiana-based design/build studio PROJECTiONE employs a multidisciplinary approach to its work that runs the gamut from digital to analog fabrication. Founders Adam Buente and Kyle Perry craftily bridged that gap with Synthetic Grain, a set piece for the Young & Laramore advertising agency of Indianapolis that explores the natural knotting and grain of lumber. The team used parametric software to create a graphic, 3D pattern system for an architectural screen that mimics natural variations of wood.

Working in Rhino, parallel lines—or the wood grain—were drawn and points were defined within. Each point served as a knot, around which the lines would gently curve. “Our only input for this project were those points in 3D space,” said Perry. To ready the design for fabrication, curves and cut holes for the plywood backing were generated in Grasshopper. Read More

Product > Finds from the Floor at NeoCon 2013

Midwest, Newsletter, Product
Wednesday, June 19, 2013
.
Cliffy 6000 from SIXINCH.

Cliffy 6000 from SIXINCH.

Nearly 42,000 architects, interior designers, facilities planners, furniture dealers, and distributors converged on NeoCon, the A&D industry’s largest exhibition of office, residential, health care, hospitality, institutional, and government design products. Held from June 10–12, the show included education components and keynote presentations from Bjarke Ingels, founder of BIG; Michael Vanderbyl, principal of Vanderbyl Design; Holly Hunt, president & CEO of Holly Hunt; and Lauren Rottet, interior architect and founder of Rottet Studio. AN was present to cover a handful of educational seminars and sessions (see our live tweets from Ingels’s presentation on our Twitter feed), and we scoured the showrooms in search of 2013’s new product trends. Following are a few we saw at the show.

Check out AN’s top picks after the jump.

Seeyond’s Parametric Building System

Fabrikator
Friday, June 24, 2011
.
Brought to you with support from:
Fabrikator
Fabrikator Brought to you by: 

A cable-suspended ceiling cloud (Seeyond)

Self-supporting tessellations can take almost any form.

“People are pretty burned out on the office cubicle and panel systems,” said Nat Porter, general manager of Seeyond Architectural Solutions. The company, which launched this month, aims to give architects an alternative to standard space dividers with its new user-controlled parametric design and digital fabrication building system. Seeyond’s history goes back ten years, to sculptor and designer Jonas Hauptman’s experimentations with folded materials. For a class he was teaching, he turned for materials to Liberty Diversified International (LDI), whose roots are in the corrugated fiberboard industry. Hauptman teamed up with Paul James, a mathematician, economist, and industrial designer already working with LDI (now Seeyond’s parent company). They presented their business proposal in 2009 and the new fabrication system was born.
Continue reading after the jump.

Parametric Tribeca House Clears Preservation Hurdle

East, Newsletter
Tuesday, April 19, 2011
.
187 Franklin Street (Courtesy Landmarks Preservation Commission)

187 Franklin Street (Courtesy Landmarks Preservation Commission)

A fanciful parametric design for an addition to a single family house in Tribeca made its way before the Landmarks Preservation Commission today and walked away with a stunning unanimous approval. Jeremy Edmiston of SYSTEMarchitects designed the new facade and addition to an existing three-story single-family house at 187 Franklin Street. According to its web site, the firm studies contemporary culture with “a focus on spaces that are multi-layered, overlapping, and intertwining — systems consisting of varying constituencies, economies and environments — systems both concrete and intangible.” From the looks of these boards presented to the panel, this project is right on the mark.

Check out more rendering after the jump.

Advertise on The Architect's Newspaper.

Submit your competitions for online listing.

Submit your events to AN's online calendar.




Archives

Categories

Copyright © 2014 | The Architect's Newspaper, LLC | AN Blog Admin Log in. The Architect's Newspaper LLC, 21 Murray Street 5th Floor | New York, New York 10007 | tel. 212.966.0630
Creative Commons License