The Cartesian Collection: A 17th Century Design Reboot

Fabrikator
Friday, June 28, 2013
.
Brought to you with support from:
Fabrikator
Fabrikator
The Cartesian Collection by Alexander Purcell Rodrigues was fabricated from 1/2-inch thick aluminum by the Neal Feay Company. (courtesy Alexander Purcell Rodrigues)

The Cartesian Collection by Alexander Purcell Rodrigues was fabricated from 1/2-inch thick aluminum by the Neal Feay Company. (courtesy Alexander Purcell Rodrigues)

An ambitious designer used Rhino to design and fabricate 20 variations on a chair in four months.

For a designer aiming to streamline the gap between design and manufacturing, parametric modeling tools are a natural solution. LA-based Alexander Purcell Rodrigues found a place to work in just such a way at the Neal Feay Company (NF), a 60-year old fabrication studio in Santa Barbara, California, that is known for its exceptional metalworking. Together, the designer and the fabrication studio created the Cartesian Collection of chairs, aptly named for the analytic geometry that helped facilitate close to 20 design variations on the same aluminum frame in just under four months. “Not only were we pushing the boundaries of aluminum fabrication, the aim was to simultaneously create a lean manufacturing process,” said Rodrigues.

Using Rhino with a Grasshopper plugin, Rodrigues developed a design for a chair that weaves together the simplicity of Western design with the complex ornamentation of traditional Eastern aesthetics. While the lines of the chair are clean and smooth, intricate embellishments on the back traverse multiple planes and angles, all on a shrunken scale. The time savings involved in designing with Rhino allowed the creation of another 19 variations on the theme. Read More

In 3D-Printed Sugar

Fabrikator
Friday, June 21, 2013
.
Brought to you with support from:
Fabrikator
Fabrikator
Liz and Kyle Von Hasseln have developed a method to 3D print edible sugar.

Liz and Kyle Von Hasseln have developed a method to 3D print edible sugar. (courtesy Sugar Lab)

A team of SCI-Arc–trained architects establish a sweet set up in Southern California.

Liz and Kyle Von Hasseln wanted to bake a birthday cake for a friend but, unfortunately, their rented apartment didn’t have an oven. Not to be deterred, the Southern California Institute of Architecture (SCI-Arc) alumni hit upon a solution that would leave most bakers scratching their heads: They decided to 3D print one.

Earlier that year, the couple had been awarded the school’s inaugural Gehry Prize for their work on Phantom Geometry, a 5-axis fabrication study of UV-cured resin within a shallow vat system that responded to real-time feed back and feed-forward mechanisms. “In our graduate work, we were really interested in the way free form fabrication would influence architecture,” Kyle recently told AN. “We thought a lot about the potential for the intersection of culture and technology that would be accessible to the public, so printing sugar was that.” Read More

MammaFotogramma Brings Motion to Plywood

Fabrikator
Friday, May 31, 2013
.
Brought to you with support from:
Fabrikator
Fabrikator
The concept for WoodSkin was first developed for Autoprogettazione 2.0, an open-source design competition, in 2012. (courtesy Mamma Fotogramma)

The concept for WoodSkin was developed for Autoprogettazione 2.0, an open-source design competition, in 2012. (courtesy MammaFotogramma)

MammaFotogramma designed a plywood and high-performance mesh composite that is scored on a CNC mill to facilitate textile-like movement.

WoodSkin is a flexible wood surfacing material developed by interdisciplinary design studio MammaFotogramma. The concept is an exploration of movement developed for Autoprogettazione 2.0, an open-source design competition from 2012 that originated in the firm’s work in stop motion animation. “We’re still in animation production, but what we do is all about movement,” said studio founder Giulio Masotti. MammaFotogramma’s current work includes architecture and design projects as well as a lab that evolved naturally as projects came in, where collaborators develop new techniques for hybridized exploration. “Project after project, we saw we were applying movement everywhere, not because it was a need but because it’s how we work and what we explore,” said Masotti.

Later in 2012, after the competition, the composite wood material was first fabricated as an interior finish for the lobby of Allez Up, an indoor rock-climbing facility in Montreal. “When we figured out what we wanted to do, we knew we needed something different,” said Masotti. “We needed a system, not just a project solution.” The goal was to design a visually appealing material that could be used in a static way with the possibility for movement. Read More

Tiled Topography from e+i studio

Fabrikator
Friday, May 3, 2013
.
Brought to you with support from:
Fabrikator
Fabrikator
PiazzaCeramica_06

e+i Studio designed a modular, 50- by 60-foot pavilion surfaced entirely in Italian tile. (courtesy Ceramics of Italy)

e+i studio of New York won a design competition for their concept of a trade show pavilion made entirely from Italian tile.

Crafting a memorable and intimate environment within voluminous convention halls can be a daunting challenge. To establish a meaningful presence in such environs, Ceramics of Italy tapped into the A&D community with a competition in 2012 for unique booth designs to showcase the products of its manufacturers. Piazza Ceramica, designed by e+i Studio and fabricated by A&M Production, won the competition. Its proposal was installed at the Coverings Tile and Stone trade show in 2012 and 2013. Inspired by Italy’s social culture, architects Ian Gordon and Eva Perez de Vega used the idea of a public space to showcase tiles produced in Italy for a bespoke, modular pavilion that houses a multi-function program of a café, information kiosk, and restaurant.

The design utilizes a topographical approach to build up the pavilion’s perimeter with seating and display installed product. “From the beginning, we started to look at the topography in a series of parametric studies to determine the optimal stair/riser ratio to integrate the substructure of the two mounds,” said Perez de Vega. “From there, we wanted color to be an important component to showcase the qualities of the tile to transition smoothly from intense greens to reds to whites.” Read More

Tietz-Baccon Dials Down The Volume in a Textural Chicago Office

Fabrikator, Midwest
Friday, March 15, 2013
.
Brought to you with support from:
Fabrikator
Fabrikator
The "fin" feature wall measures 10 feet by 160 feet. (Christopher Barrett)

Raw material was juxtaposed against lacquered MDF at the bottom that alternates for textural variation as well as durability. (Christopher Barrett)

Tietz-Baccon fabricated a 7-foot by 23-foot freestanding wall, and a 10-foot by 160-foot decorative wall for Enova’s Chicago offices.

As more and more companies embrace open workspaces that support collaborative and impromptu group work, acoustics are of utmost importance to employee productivity. To craft sound-absorbing feature walls for the Chicago offices of financial firm Enova, Brininstool + Lynch turned to fabrication studio Tietz-Baccon. Their six-person facility in Long Island City, New York, makes bespoke solutions for a variety of design-minded clients who appreciate—and ultimately benefit from—the founders’ architectural background: Erik Tietz and Andrew Baccon met as students at Harvard’s Graduate School of Design.

“On the fabrication end, we take nonstandard projects and make them achievable by relying heavily on our digital capabilities,” Baccon said. “Brininstool + Lynch had a concept that was worked out very well and was looking for someone who could execute on a tight budget in a short period of time.” According to Baccon, the architects came to the fabricators with a family of shapes and a way of aggregating them, which was then applied to different materials, helping Tietz-Baccon deliver finished projects very close to the firm’s original requests. “There was good collaborative discussion, and a back-and-forth to tweak and bring the concept to realization. They didn’t have to compromise their idea that much.”

Continue reading after the jump.

Synthesis Design’s Bespoke Office

Fabrikator
Friday, February 3, 2012
.
Brought to you with support from:
Fabrikator
Fabrikator Brought to you by:

The desk's volumes conceal storage space (Peter Guenzel)

A carefully detailed private workspace conceals office equipment behind birch plywood ribs

It’s a reality of the modern work world that many people work from home. But a home office need not look like a corporate cube. That was the idea behind a customized workspace designed for a personal investment advisor by Los Angeles-based Synthesis Design + Architecture. Located in the client’s Chelsea home in London, the design conceals storage units and office equipment behind a sculptural work surface.

Continue reading after the jump.

BLOCK Research Group’s Freeform Catalan Thin-Tile Vault

Fabrikator
Friday, December 30, 2011
.
Brought to you with support from:
Fabrikator
Fabrikator Brought to you by:

The freeform vaulted structure is BLOCK Research Group's first built prototype (BLOCK)

A research project explores techniques from the past to learn about building stronger structures in the future

Sometimes research involves destruction in the name of creation. Architects and engineers from Zurich-based BLOCK Research Group at science and technology university ETH Zurich recently teamed up to build, and destroy, a vaulted masonry structure that was designed with advanced digital fabrication methods but constructed with traditional timbrel, or Catalan, thin-tile vaulting techniques. Through its research of freeform shells, tiling patterns, building sequences, and formwork, the group hopes to construct increasingly radical forms without sacrificing efficiency.

Continue reading after the jump.

Congratulations Mr. Adjaye, DesignMiami’s Designer of the Year

National
Friday, September 9, 2011
.
(Courtesy DesignMiami)

David Adjaye's installation for Miami Beach. (Courtesy DesignMiami)

Sometimes it seems like our world is peopled entirely by yesterday’s and tomorrow’s Designers of the Year. But at least DesignMiami’s Global Forum for Design’s Designer of the Year Award comes with a nifty commission. This year the honor goes to David Adjaye and he will be designing a site specific installation for the entrance to the fair’s temporary structure on Miami Beach, open from November 29 through December 4.

Continue reading after the jump.

nonLin/Lin Pavilion: Marc Fornes/THEVERYMANY

Fabrikator
Friday, August 19, 2011
.
Brought to you with support from:
Fabrikator
Fabrikator Brought to you by:

The nonLin/Lin Pavilion at the FRAC Centre in Orleans, France (THEVERYMANY)

An aluminum prototype structure at FRAC explores non-linear design and fabrication

The new nonLin/Lin Pavilion at the FRAC Centre in Orleans, France, is a coral-like structure of 40 pre-assembled white aluminum modules made of 570 CNC-cut single components punched with 155,780 asterisk-shaped CNC-drilled holes and held together by 75,000 white aluminum rivets. But these pieces, as designer Marc Fornes of THEVERYMANY has demonstrated throughout his work, are much more than the sum of their parts. Neither an art installation nor a model, the pavilion is full-scale architecture that pushes the limits of its materials and of physical fabrication processes with custom computational protocols.

Read More

Page 2 of 212

Advertise on The Architect's Newspaper.

Submit your competitions for online listing.

Submit your events to AN's online calendar.




Archives

Categories

Copyright © 2014 | The Architect's Newspaper, LLC | AN Blog Admin Log in. The Architect's Newspaper LLC, 21 Murray Street 5th Floor | New York, New York 10007 | tel. 212.966.0630
Creative Commons License