Between keynote sessions, awards presentations, and interviews at the American Institute of Architects‘ (AIA) National 2013 Convention, AN‘s editors joined 20,000 attending architects in the search for the newest and most innovative products on the floor of the Colorado Convention Center’s exposition hall. Following are a few notable discoveries.
SureClad Porcelain Stone
The Tennessee-based supplier of interior ceramics has partnered with Shackerley, a British manufacturer of porcelain ventilated facade systems, for an exterior cladding solution that meets U.S. building codes, including all seismic and hurricane standards. The system (pictured above) is supported by an aluminum frame and is delivered to job sites as a prefabricated system to ensure fast and efficient installation.
An ambitious designer used Rhino to design and fabricate 20 variations on a chair in four months.
For a designer aiming to streamline the gap between design and manufacturing, parametric modeling tools are a natural solution. LA-based Alexander Purcell Rodrigues found a place to work in just such a way at the Neal Feay Company (NF), a 60-year old fabrication studio in Santa Barbara, California, that is known for its exceptional metalworking. Together, the designer and the fabrication studio created the Cartesian Collection of chairs, aptly named for the analytic geometry that helped facilitate close to 20 design variations on the same aluminum frame in just under four months. “Not only were we pushing the boundaries of aluminum fabrication, the aim was to simultaneously create a lean manufacturing process,” said Rodrigues.
Using Rhino with a Grasshopper plugin, Rodrigues developed a design for a chair that weaves together the simplicity of Western design with the complex ornamentation of traditional Eastern aesthetics. While the lines of the chair are clean and smooth, intricate embellishments on the back traverse multiple planes and angles, all on a shrunken scale. The time savings involved in designing with Rhino allowed the creation of another 19 variations on the theme. Read More
At the AIA’s National Convention in Denver, held from June 19–22, AN’s Emily Hooper sat down with Spanish architect Francisco Mangado, who was in attendance to receive an honorary fellowship. Mangado discussed foreboding amendments to Spain’s law of professional services that would allow engineers, or anyone deemed “competent” in construction, to design and erect buildings across the nation. The law was introduced at a council meeting of Government Ministers in April of 2013, and a final pass-or-fail decision will be reached by the end of this year. Read More
A team of SCI-Arc–trained architects establish a sweet set up in Southern California.
Liz and Kyle Von Hasseln wanted to bake a birthday cake for a friend but, unfortunately, their rented apartment didn’t have an oven. Not to be deterred, the Southern California Institute of Architecture (SCI-Arc) alumni hit upon a solution that would leave most bakers scratching their heads: They decided to 3D print one.
Earlier that year, the couple had been awarded the school’s inaugural Gehry Prize for their work on Phantom Geometry, a 5-axis fabrication study of UV-cured resin within a shallow vat system that responded to real-time feed back and feed-forward mechanisms. “In our graduate work, we were really interested in the way free form fabrication would influence architecture,” Kyle recently told AN. “We thought a lot about the potential for the intersection of culture and technology that would be accessible to the public, so printing sugar was that.” Read More
Seven design variations are applied across 17 custom wooden benches, fabricated by Mark Richey Woodworking.
Sited above a vehicular tunnel and therefore bereft of old growth trees, the Plaza at Harvard University, with its aggregate porcelain paving and curvaceous, sculptural benches, stands in stark visual contrast to the school’s notably shady yard and north campus. Designed by Stoss Landscape Urbanism, the plaza serves as a multi-functional space for staff, students, and the local community. A large part of accomplishing this goal fell to the unique seating solution, a collection of custom-designed, wooden slat benches that aim to increase the function and user comfort of the public space. Some of the benches are meant for lounging with no back and a low seat height, while others are higher with full seat backs. Some twist in the manner of a Victorian tete-a-tete settee, while still others support a touchdown working posture.
Stoss’s design for the benches, sliced like a loaf of bread, was achieved in Rhino with a Grasshopper plugin. The parametric modeling tool was instrumental in defining the benches’ complex geometries. “At every change, the curves meet two general sections so there’s a morphology of that form work,” said Erik Prince, an associate at Stoss who worked on the plaza. “The wooden slats are an incremental radial splay of the overall geometry so every rib has a unique angle to it.” The design team produced a 3D model for each of the 17 benches. Since the benches were manufactured based on information contained in the digital files, a substantial portion of time was spent developing accurate models that could be extrapolated for the fabrication process. Read More
Getting excited for NeoCon? AN is. In fact, AN product editor Emily Hooper was so eager to see the latest design products for commercial interiors that she prepared this preview of some of best chairs, casegood systems, and acoustical panels that will be on view this year in Chicago.
To meet the needs of the nomadic workforce, Coalesse tapped Milan-based Toan Nguyen to design the Lagunitas line. Made to accommodate a solitary task session, a working lunch, or a brief touchdown to check emails, the collection features more than 50 combinations of seating, tables, and privacy screens perfect for laidback productivity.
Frank Gehry, who is currently working on Facebook’s new Silicon Valley campus in Menlo Park, California, will design a new office for the company’s New York-based engineering team at 770 Broadway in Manhattan. The move will nearly double the company’s current workspace.
In a note from Serkan Piantino, Facebook New York’s engineering team site director, the new offices will share many of the same features of Facebook’s California headquarters, but with a twist that is uniquely New York. Approximately 100,000 square feet across two floors will be updated with open, collaborative spaces, conference rooms, cozy and casual work areas, writeable surfaces, and integrated video conferencing equipment. There are also plans to build out a full service kitchen for Facebook employees.
At 770 Broadway, Facebook will join tenants AOL/Huffington Post, Adweek, JCrew, and Structure Tone. The move from their current offices at 335 Madison Avenue is scheduled for early 2014 under a 10-year lease with building owners Vornado Realty Trust.
MammaFotogramma designed a plywood and high-performance mesh composite that is scored on a CNC mill to facilitate textile-like movement.
WoodSkin is a flexible wood surfacing material developed by interdisciplinary design studio MammaFotogramma. The concept is an exploration of movement developed for Autoprogettazione 2.0, an open-source design competition from 2012 that originated in the firm’s work in stop motion animation. “We’re still in animation production, but what we do is all about movement,” said studio founder Giulio Masotti. MammaFotogramma’s current work includes architecture and design projects as well as a lab that evolved naturally as projects came in, where collaborators develop new techniques for hybridized exploration. “Project after project, we saw we were applying movement everywhere, not because it was a need but because it’s how we work and what we explore,” said Masotti.
Later in 2012, after the competition, the composite wood material was first fabricated as an interior finish for the lobby of Allez Up, an indoor rock-climbing facility in Montreal. “When we figured out what we wanted to do, we knew we needed something different,” said Masotti. “We needed a system, not just a project solution.” The goal was to design a visually appealing material that could be used in a static way with the possibility for movement. Read More