Bright Lights, Big Bus Terminal

East
Thursday, May 5, 2011
.

The new lighting design as seen from 42nd and 8th Ave. Courtesy GKD-USA/A2aMEDIA

By the end of June, the Port Authority Bus Terminal will be awash in graphics and light when a 6, 000 square foot stainless steel fabric embedded with LED lights wraps its way around the corner of 42nd Street and Eighth Avenue.  The technology, known as Mediamesh, was developed by GKD-USA, a collaboration between a German light engineer firm and an American metal fabric manufacturer. The product is only four years old and allows LED imagery to wrap around buildings without disrupting interior views to the outside. But in the case of the Port Authority, the mesh allows exhaust fumes to escape while masking several giant X-trusses, a facade hasn’t exactly endeared itself to New Yorkers.

In a rendering, a fireball flips around the facade.

This is the largest scale application of the technology to date in New York (it’s also used on a smaller scale at the Crowne Plaza a few blocks away in  Times Square). And while the Port Authority will likely be using the signage for advertising, the medium has been used for art installations, like a 4,000- hour video loop of a woman basket weaving that graces California State University’s Madden Library in Fresno.

During the day the facade appears opaque.

Tom Powley, president of GKD-USA, said that because the metal fabric is a tensile structure it can be hung over a large area without the need of extensive steel support.

For the second phase of the project the remaining uncovered trusses will be lit by LED lights that face the surface of the truss. A lighting program will pull the dominant color from the billboard display and this will dictate the color of the light.

Preferable viewing distance to see the photo imagery of the corner display ranges from 80 to 100 feet. The space between the light bands determines the translucence of the material from the street level. In some cases revealing the facade may desirable, but in the case of the Port Authority, the weave may end up a bit tighter.

Detail of the Mediamesh screen.

3 Responses to “Bright Lights, Big Bus Terminal”

  1. kenneth denny says:

    Is this what “form follows function” has become. It’s a huge wast of money and electricity all for ostentatious goals. I can’t wait to see this in five years, when it’s useful life has been exceeded!

  2. Amanda Eden says:

    Hi Kenneth, just some points to address your concerns:
    1. LEDs are used in the project so energy consumption will be low
    2. LED life will take us into the next decade before needing replacement and it’s a very simple proecedure
    3. Stainless steel fabric will last decades
    4. Stainless steel can be re used or 100% recycled
    5. Fabric is transparent so the facelift allows visibility; allows air flow for circulation so mechanical ventilation is not required meaning less energy used
    6. Revenue is generated and community messages are aired for return to the public
    7. Payback (ROI) is shorter than five years – so the building gets a facelift without net cost.

    Hope that helps!

  3. nawaz says:

    oh snap you got served Kenneth denny

Post new comment

Name (required)

E-Mail (required)

Advertise on The Architect's Newspaper.

Submit your competitions for online listing.

Submit your events to AN's online calendar.




Archives

Categories

Copyright © 2014 | The Architect's Newspaper, LLC | AN Blog Admin Log in. The Architect's Newspaper LLC, 21 Murray Street 5th Floor | New York, New York 10007 | tel. 212.966.0630
Creative Commons License