W Seattle Hotel’s Parametric Pilings

Fabrikator
Friday, October 4, 2013
.
Brought to you with support from:
Fabrikator
Each column measures approximately 36 inches in diameter. (Boone Speed/Skylab Architecture)

One dozen columns are wrapped in a CNC milled wood solution that recalls Seattle’s cultural and maritime history. (Boone Speed/Skylab Architecture)

LIT Workshop fabricated sleek lodge poles to complement the city’s heritage.

When Starwood Properties began to reimagine a new living room concept for the W Seattle, the existing first floor space featured a disconnected bar, restaurant, and lounge area, much like the traditional layout of a formal home. Portland, Oregon–based architecture firm Skylab Architecture was charged with knocking down the visual barriers for an open floor plan that resembled a more modern, casual living space.

Several preexisting columns could not be removed for structural reasons, so a truly open plan had to be amended. “In some ways you could see them as a negative, or they could be seen as a positive,” Skylab principal Brent Grubb told AN. “We try to turn those perceived negatives into a design element and make it unique.” Researching the city’s cultural and maritime history inspired the architecture team to combine the water-worn patina of shore-front pilings with the physical mass of wooden totem poles. The solution was a parametrically streamlined form that was fabricated in modular sections for swift installation. Read More

Explore Environmental Analysis for High Performance Building Envelope Design at Facades+ Chicago

Midwest, National
Thursday, September 12, 2013
.

Banner_Workshop-Image_EnvironmentalAnalysis_615x105

Next month, AN is providing registered architects the opportunity to earn 8 AIA LU credits and the chance to collaborate with industry experts on practical projects at Facades+PERFORMANCE Chicago. Mostapha Roudsari of Thornton Tomasetti is leading one of six full-day tech workshops programmed for October 25th at the Illinois Institute of Technology, where he will investigate building envelope performance through hands-on tasks.

For those with beginner level knowledge of Grasshopper, Roudsari will explore the relationship between building envelope performance and architectural design decision-making. Environmental Analysis for High Performance Building Envelope Design will involve a short introduction to the basics of building envelope performance evaluation, in addition to practical weather data analysis. Through a series of applications, this workshop will guide participants through an iterative method of understanding the issue, conducting design evaluations, setting up parametric models, leading environmental analyses, and drawing conclusions.

Roudsari is an Integration Applications Developer at Thornton Tomasetti where he specializes in environmental building design and simulation. His diverse expertise allows him to create automated performance-driven design and optimization workflows by integrating advanced parametric modeling with environmental performance analysis and multi-objective optimization algorithms. Roudsari is the developer for Ladybug and Honeybee, two environmental plugins for Grasshopper that allow users to import and analyze weather data and run parametric environmental studies using RADIANCE, DAYSIM and EnergyPlus directly from Grasshopper3D.

Register for Facades+ and learn more about Roudsari’s tech workshop.

Zaha Hadid unveils new details about her curvy Miami skyscraper

New renderings of Zaha Hadid's One Thousand Museum tower in Miami. (Courtesy 1000 Museum)

New renderings of Zaha Hadid’s One Thousand Museum tower in Miami. (Courtesy 1000 Museum)

Miami’s development scene has been heating up in the past year with starchitects lining up for a chance to build in the Magic CityZaha Hadid has been equally as hot with several irons in the fire since the last series of renderings for her first U.S. skyscraper, the residential One Thousand Museum tower on the city’s waterfront, were unveiled in April. Along with designing a stadium for the 2022 World Cup and the New National Stadium in Japan, she managed to find time to make plans for the already dramatic tower even more extraordinary. New details have recently surfaced on the project’s website about the fanciful sculptural structure, detailing the building’s sky lounge, aquatic center, and curvy-furniture-stocked lobby, not to mention Miami’s first private helipad placed on a residential complex.

Continue reading after the jump.

The Cartesian Collection: A 17th Century Design Reboot

Fabrikator
Friday, June 28, 2013
.
Brought to you with support from:
Fabrikator
Fabrikator
The Cartesian Collection by Alexander Purcell Rodrigues was fabricated from 1/2-inch thick aluminum by the Neal Feay Company. (courtesy Alexander Purcell Rodrigues)

The Cartesian Collection by Alexander Purcell Rodrigues was fabricated from 1/2-inch thick aluminum by the Neal Feay Company. (courtesy Alexander Purcell Rodrigues)

An ambitious designer used Rhino to design and fabricate 20 variations on a chair in four months.

For a designer aiming to streamline the gap between design and manufacturing, parametric modeling tools are a natural solution. LA-based Alexander Purcell Rodrigues found a place to work in just such a way at the Neal Feay Company (NF), a 60-year old fabrication studio in Santa Barbara, California, that is known for its exceptional metalworking. Together, the designer and the fabrication studio created the Cartesian Collection of chairs, aptly named for the analytic geometry that helped facilitate close to 20 design variations on the same aluminum frame in just under four months. “Not only were we pushing the boundaries of aluminum fabrication, the aim was to simultaneously create a lean manufacturing process,” said Rodrigues.

Using Rhino with a Grasshopper plugin, Rodrigues developed a design for a chair that weaves together the simplicity of Western design with the complex ornamentation of traditional Eastern aesthetics. While the lines of the chair are clean and smooth, intricate embellishments on the back traverse multiple planes and angles, all on a shrunken scale. The time savings involved in designing with Rhino allowed the creation of another 19 variations on the theme. Read More

Winning “Cellular Complexity” installation design twists the limits of architecture

Rendering and model of Cellular Complexity. (Courtesy Julia Koerner, Marie Boltenstern, and Kais Al-Rawi)

Rendering and model of Cellular Complexity. (Courtesy Julia Koerner, Marie Boltenstern, and Kais Al-Rawi)

AIA Los Angeles has announced that UCLA SUPRASTUDIO lecturer Julia Koerner’s proposal Cellular Complexity is the winning entry for the 11th annual 2×8 Student Exhibition, a scholarship organization that has showcased projects of over 150 students from more than 15 architecture and design schools in California. This year’s winning scheme, in collaboration with Paris-based architect Marie Boltenstern and architect Kais Al-Rawi, presents a parametric pavilion of twisting planes that transitions in porosity from one end to the other. According to the AIA|LA, the jury appreciated the design concept’s creativity and edginess. The installation and exhibition of student work is expected to be complete by February 2014.

More images after the jump.

Product > Finds from the Floor at NeoCon 2013

Midwest, Newsletter, Product
Wednesday, June 19, 2013
.
Cliffy 6000 from SIXINCH.

Cliffy 6000 from SIXINCH.

Nearly 42,000 architects, interior designers, facilities planners, furniture dealers, and distributors converged on NeoCon, the A&D industry’s largest exhibition of office, residential, health care, hospitality, institutional, and government design products. Held from June 10–12, the show included education components and keynote presentations from Bjarke Ingels, founder of BIG; Michael Vanderbyl, principal of Vanderbyl Design; Holly Hunt, president & CEO of Holly Hunt; and Lauren Rottet, interior architect and founder of Rottet Studio. AN was present to cover a handful of educational seminars and sessions (see our live tweets from Ingels’s presentation on our Twitter feed), and we scoured the showrooms in search of 2013’s new product trends. Following are a few we saw at the show.

Check out AN’s top picks after the jump.

Sliced Benches at Harvard Great for Loafing

Fabrikator
Friday, June 14, 2013
.
Brought to you with support from:
Fabrikator
Fabrikator
Stoss Landscape Urbanism designed 17 unique, wooden benches for a new plaza at Harvard University. (courtesy Stoss Landscape Urbanism)

Stoss Landscape Urbanism designed 17 unique, wooden benches for a new plaza at Harvard University. (courtesy Stoss Landscape Urbanism)

Seven design variations are applied across 17 custom wooden benches, fabricated by Mark Richey Woodworking.

Sited above a vehicular tunnel and therefore bereft of old growth trees, the Plaza at Harvard University, with its aggregate porcelain paving and curvaceous, sculptural benches, stands in stark visual contrast to the school’s notably shady yard and north campus. Designed by Stoss Landscape Urbanism, the plaza serves as a multi-functional space for staff, students, and the local community. A large part of accomplishing this goal fell to the unique seating solution, a collection of custom-designed, wooden slat benches that aim to increase the function and user comfort of the public space. Some of the benches are meant for lounging with no back and a low seat height, while others are higher with full seat backs. Some twist in the manner of a Victorian tete-a-tete settee, while still others support a touchdown working posture.

Stoss’s design for the benches, sliced like a loaf of bread, was achieved in Rhino with a Grasshopper plugin. The parametric modeling tool was instrumental in defining the benches’ complex geometries. “At every change, the curves meet two general sections so there’s a morphology of that form work,” said Erik Prince, an associate at Stoss who worked on the plaza. “The wooden slats are an incremental radial splay of the overall geometry so every rib has a unique angle to it.” The design team produced a 3D model for each of the 17 benches. Since the benches were manufactured based on information contained in the digital files, a substantial portion of time was spent developing accurate models that could be extrapolated for the fabrication process. Read More

Product> The Comprehensive New York Design Week 2013 Roundup

East, Newsletter, Product
Monday, June 10, 2013
.
The Low Collection by 13&9 Design

The Low Collection by 13&9 Design.

New York’s inaugural design week, held from May 10 through 21, was a comprehensive, two-week celebration of all things design across Manhattan island, as well as parts of Brooklyn. Showcasing the latest from industry stalwarts to emerging and independent designers—local, domestic, and international—AN culled its top picks of New York Design Week products from the ICFF show floor, Wanted Design exhibitions, showroom launches, and all events in between. 

The Low Collection
13&9 Design
The multidisciplinary Austrian design studio debuted at Wanted Design with a collection of furniture, wearable fashion and accessories, a cinematic video, and a music album. With the Low Collection (pictured above), Corian is formed into several seating styles that combine with storage vessels, all at ground level. Suitable for outdoors, furniture heights can be modified to generate a unique landscape.

Continue reading after the jump.

A Plus Design for Elevator B Hive

Fabrikator
Friday, June 7, 2013
.
Brought to you with support from:
Fabrikator
Fabrikator
Elevator B by students of the School of Architecture and Planning at the University of Buffalo, located in Buffalo's First Ward (Hive City Design Team)

Elevator B by students of the School of Architecture and Planning at the University of Buffalo, located in Buffalo’s First Ward (Hive City Design Team)

The 22-foot Elevator B honeybee habitat was the winning proposal in a design competition sponsored by Rigidized Metals and the University
at Buffalo.

The disquieting phenomenon of colony collapse disorder is seeing global bee populations vanish before our eyes, threatening the pollination of much of the world’s food crops. So when Buffalo, New York, metal fabricator Rigidized Metals discovered a colony of bees in an abandoned grain silo that its owner purchased, the company sponsored the Hive City competition. Students at the University at Buffalo (UB) were invited to design a viable bee habitat that would spark interest in the Silo City area and demonstrate the strengths of various building materials suppliers in Buffalo’s First Ward. As the first, permanent new construction on the Silo City site, Rigidized Metals wanted something that would be visible from nearby Ohio Street, stand out in the industrial landscape, and be reverent to neighboring silos.

The winning design, known as Elevator B, is a 22-foot tower of 18-gauge sheet metal panels, with strategic perforations for natural ventilation, light, and heat management. An operable bee “cab” in the interior supports the actual hive on a pulley system, allowing beekeepers to access the colony and return it to a level that keeps the population safe from predators. Read More

DesignX Workshop: MODE LAB INTRO TO PARAMETRIC DESIGN WITH GRASSHOPPER

East
Wednesday, May 15, 2013
.

designx_rhino_02

Interested in learning how to build parametric design models using Grasshopper for Rhino3D? DesignX, in conjunction with the International Contemporary Furniture Fair, is offering a workshop on Monday, May 20, 2013 from 10:30 AM to 12:30 PM that focuses on fundamental concepts and mechanisms with an emphasis on professional practice. Instructors Ronnie Parsons and Gil Akos will help participants understand pertinent applications of parametric design and will demonstrate how to use Grasshopper in creative practices. Interiors, architects, and anyone seeking to find out what parametric design is and when it is useful can register and attend. The workshop fulfills two AIA CEUs.

Learn Parametric Design From the Pros at Facades+PERFORMANCE On April 11+12

East
Tuesday, April 2, 2013
.

parametric_wkshp_01

We know you’ve seen those sleek parametric designs that are all the rage in cutting-edge architecture, but have you ever wanted to make your own? Venturing into the software zoo of Grasshopper and Rhino can be daunting on your own, and understanding algorithms and computational geometry can sound like Greek to the uninitiated. Luckily, parametric expert Ronnie Parsons of Mode Collective has joined the upcoming facades+PERFORMANCE Conference taking place in New York City next week, April 11 and 12, and will help guide beginners into the exciting world of Parametric Design.

With a focus on fundamental concepts and workflows for creating performance-based design models with the parametric design tool  Grasshopper for Rhino3D. Parsons’ Technical Workshop, Introduction to Parametric Design, will guide participants through a series of exercises designed to emphasize the relevant applications of parametric design for professional practice.

Register today for the Introduction to Parametric Design workshop and the facades+PERFORMANCE before space fills up. There are 8 LU AIA CE credits up for grabs, so head on over to the facades+PERFORMANCE homepage for more information.

Mode Lab Launches Online Learning Resource for Parametric and Digital Design

International
Tuesday, February 26, 2013
.
(Courtesy Mode Lab)

(Courtesy Mode Lab)

Intrigued by parametric architecture but don’t know where to begin? Meet Mode Lab, an online network connecting creatives to everything architectural and design related including courses, talks, and workshops that help teach how to use advanced systems like Data Trees, Grasshopper, and Kangaroo. Other courses offer lessons in Organic Modeling to Parametric Pleating to Algorithmic Design. The group just launched their new website, with several upgrades that make taking courses even easier. Courses are now easily sortable by format, subject, or software; a growing community of instructors have joined the Mode Lab team; payment has been streamlines; and work by Mode Lab members is now featured on the site. Mode Lab’s growing online destination is transforming the way designers and architects interact, share, and gain the skills and knowledge to develop innovative ideas.

Page 2 of 3123

Advertise on The Architect's Newspaper.

Submit your competitions for online listing.

Submit your events to AN's online calendar.




Archives

Categories

Copyright © 2015 | The Architect's Newspaper, LLC | AN Blog Admin Log in. The Architect's Newspaper LLC, 21 Murray Street 5th Floor | New York, New York 10007 | tel. 212.966.0630
Creative Commons License